Page 103 - Tanner Fasteners & Industrial Supplies Biig Book
P. 103

Anchors_2_17.qxp_Layout 1  8/21/17  2:53 PM  Page 95

             EXPANSION ANCHORS





               POWER-BOLT     ®       Heavy Duty Sleeve Anchors

              The Power-Bolt anchor is a heavy duty sleeve style, self-undercutting   Further turning causes the threaded  bolt to advance into the threads of
                        ®
              anchor which is vibration resistant and removable. Power-Bolt anchors are  the expander cone, forcing its four  sections outward. This action undercuts
                                                         ®
              manufactured using a Grade 5 bolt with a hex or flat head and can be used   the base material deep in the anchor hole, greatly increasing the holding
                                                                                        ®
              in concrete, brick, block or stone.                      power of the Power-Bolt . The bolt and cone remain locked together which
              Expansion occurs at two locations within the drilled hole. First the cone is  prevents loosening under even the most severe vibratory conditions.
              pulled into the expansion sleeve, developing a mid-level compression force.

                                                                                      ®
              POWER-BOLT HEX HEAD                                      POWER-BOLT FLAT HEAD
                             ®
              304 Stainless Steel                                      Carbon Steel, Zinc Plated
                                ®
              Stainless steel Power-Bolt anchors are manufactured from 300 series   The flat head Power-Bolt anchor has a hex key insert formed in the
                                                                                        ™
              stainless steel (passivated).                            head of the bolt.  1 box contains an Allen wrench which matches
                                                                       the insert size.




               ITEM       SIZE       DRILL                    MIN.                 BOX           CTN.       ITEM  SIZE  DRILL                    MIN.                 BOX             CTN.
               CODE                  DIA.                       EMBEDMENT QTY.           QTY.   CODE  DIA.                       EMBEDMENT QTY.             QTY.
              POW 05902   1/4" x 1-3/4"  1/4"  1-1/4"  100  600        POW 06981     3/8" x 3-3/4"  3/8"  2"  50  300
              POW 05906   1/4" x 3"  1/4"   1-1/4"  100  600           POW 06982     3/8" x 5"  3/8"  2"  50  300
              POW 05910   3/8" x 2-1/4"  3/8"  2"  50  300             POW 06983     3/8" x 6"  3/8"  2"  50  300
                                                         •The published
              POW 05914   3/8" x 3-1/2"  3/8"  2"  50  300             POW 06984     1/2" x 5"  1/2"  2-1/2"  25  150
                                                          length is measured
              POW 05916   3/8" x 4"  3/8"   2"   50  300               POW 06987     5/8" x 5-1/2"  5/8"  2-3/4"  15  90
                                                          from below the
              POW 05930   1/2" x 2-3/4"  1/2"  2-1/2"  50  200
                                                          washer to the end
              POW 05934   1/2" x 4-3/4"  1/2"  2-1/2"  25  150
                                                          of the anchor.
               INSTALLATION                                             MATERIAL SPECIFICATIONS

                                                                        Anchor Component      Carbon Steel Flat Head       Stainess Hex Head
                                                                        Internal Bolt     SAE Grade 5*        **Type 304 SS
                                                                        Washer            N/A                 Type 18-8 SS
                                                                        Expander Sleeve   AISI 1010           Type 304 SS
                                                                        Extension Sleeve  AISI 1010           Type 304 SS
                                                                        Expander Cone     AISI 12L14          Type 303 SS
                                                                        Compression Ring  Nylon               Nylon
                                                                        Dust Cap          Nylon               Nylon
                                                                        Zinc Plating      ASTM B 633, SC1, TYPE III (Fe/Zn 5) - Mild Service Condition
             Using the proper Blow the hole  Drive the anchor Tighten the
                                                                       * 1/4” and 5/16” diameter Power-Bolts are manufactured with SAE Grade 8 internal bolts.
             diameter bit, drill clean of dust and through the   anchor by turning
                                                                       ** Manufactured with a minimum yield strength of 65,000 psi.
             a hole into the  other material.   fixture into the  the head 3 to 5  Stainless steel anchor components are passivated. The stainless steel expander cone is zinc plated.
             base material to  Do not expand   anchor hole until turns past finger
             a depth of at   the anchor or   the bolt head is  tight or by
             least 1/2" or one  advance the bolt firmly seated  applying the
             anchor diameter in the anchor   against the   guide installation
             deeper than the assembly prior to fixture. Be sure  torque from
             embedment     installation.  the anchor is  the finger tight
             required.                   driven to the   position.
                                         required embed-
                                         ment depth.








                                                                                                                             95
                                                 www.shoptanner.com         email: sales@tannerbolt.com        800 456-2658
                                                 714 Montauk Ave., Brooklyn,  NY 11208    718 434-4500   Fax: 718 434-3215
                                                 60-01 55th Drive, Maspeth, NY 11378    718 786-2050   Fax: 718 228-7297
                                                 800 3rd Ave., Brooklyn, NY 11232    929 337-1821
   98   99   100   101   102   103   104   105   106   107   108