Page 118 - Tanner Fasteners & Industrial Supplies Biig Book
P. 118

Anchors_2_17.qxp_Layout 1  8/21/17  2:58 PM  Page 110

                                                                 BOLT & SHIELD ANCHORS





             HOLLOW-SET DROPIN         ™  Expansion Anchors
                            ™
        ANCHORS  The Hollow-Set Dropin™ anchor is designed for anchoring in hollow base  anchoring to 1" or less. The design of the Hollow-Set Dropin overcomes
                                                                     the back side of the wall often decreases the wall thickness available for
                      ™
                                                                                                          ™
           materials such as hollow concrete block, brick with weep holes and hollow
                                                                     this problem. It is also appropriate for use in overhead applications.
           core pre-cast concrete plank. Hollow masonry materials often have a mini-
           mum outer wall thickness of 1-1/2". During the drilling process, spalling on

            INSTALLATION SPECIFICATIONS                               HOLLOW-SET     ™

             Dimension                                                                            Rod/Anchor  Diameter  Zamac Body w/Carbon Steel Cone
                                1/4”   5/16”  3/8”  1/2   5/8”
             ANSI Drill Bit Size,  (in.)  3/8  5/8  5/8  3/4  1
             Maximum Tightening
             Torque (ft.-lbs.)  3-4                 5-7  8-10  15-20  30-40  ITEM   ROD/ANCHOR    DRILL                      OVERALL             SLEEVE                 BOX  CARTON
                                                                      CODE     SIZE                       DIAMETER             LENGTH               LENGTH                QTY.                  QTY.
             Thread Size (UNC)  1/4-20  5/16-18  3/8-16  1/2-13  5/8-11
                                                                      POW 09320  1/4"  3/8"  7/8"  5/8"  100   1000
             Overall Anchor Length  (in.)  7/8  1-5/16  1-5/16  1-3/4  2
                                                                      POW 09330  5/16"  5/8"  1-5/16"  15/16"  50  500
             Sleeve Length (in.)  5/8  15/16  15/16  1-1/4  1-1/2
                                                                      POW 09340  3/8"  5/8"  1-5/16"  15/16"  50  500
             Thread Length (in.)  3/8  5/8   5/8   3/4    1
                                                                      POW 09350  1/2"  3/4"  1-3/4"   1-1/4"   50  250
                                                                      POW 09360  5/8"  1"   2"    1-1/2"  25  125
            INSTALLATION
             HOLLOW BASE MATERIAL
             Drill a hole into the base material to the required depth. In           ™
             hollow base materials, drill through into the cell or void. The  HOLLOW-SET
             tolerances of the drill bit used should meet the requirements   Zamac Body w/Stainless Steel Cone
             of ANSI Standard B212.15.                                ITEM     ROD/ANCHOR    DRILL                      OVERALL             SLEEVE                  BOX  CARTON
                                                                      CODE     SIZE                       DIAMETER             LENGTH               LENGTH                QTY.                  QTY.
             Blow the hole clean of dust and other materials. Do not
                                                                      POW 09420  1/4"  3/8"  7/8"  5/8"  100   1000
             expand the anchor prior to installation. Insert cone end and tap  POW 09440  3/8"  5/8"  1-5/16"  15/16"  100  500
             flush to surface.
             Position fixture, insert bolt and tighten. The bolt should
             engage a minimum of 2/3 of the anchor threads. The anchor
             can also be expanded using a Hollow-Set Tool.            SETTING TOOLS
                                                                      For Hollow Base Materials
             (If Hollow-Set Tool is used, thread anchor onto tool prior to
             tapping into anchor hole. When flush with surface, turn tool
             clockwise to tighten. Release tool from set anchor by turning
             counter-clockwise.  Fixture can then be attached).
                                                                      ITEM                           BOX
                                                                      CODE           SIZE            QTY.
                                                                      POW 09323         1/4"        1
            INSTALLATION                                              POW 09333      5/16"          1
                                                                      POW 09343         3/8"        1
            SOLID BASE MATERIAL                                       POW 09353         1/2"        1
            Drill a hole into the base material to the required embedment  POW 09363         5/8"   1
            depth. The tolerances of the drill bit used should meet the
            requirements of ANSI Standard B212.15.
            Blow the hole clean of dust and other materials. Insert the   SETTING TOOLS
            anchorinto the hole. Position the setting tool in the anchor.  For Solid Base Materials

            Use the Solid Tool, set the anchor by driving the Zamac sleeve
            over the cone using several sharp hammer blows. Be sure the  ITEM                        BOX
                                                                      CODE           SIZE            QTY.
            anchor is at the required embedment depth, so that anchor  POW 09322         1/4"       1 1
        110ANCHORS                                                                                  1 1
            threads do not protrude above the surface of the base material.
                                                                                     5/16" and 3/8"
                                                                      POW 09342
            Position the fixture, insert the bolt or threaded rod and tighten.
                                                                      POW 09352
                                                                                     1/2"
                                                                                     5/8"
                                                                      POW 09362
                                                                     Hollow set tool for hollow block and clay brick masonry base materials.
           800 456-2658         email: sales@tannerbolt.com        www.shoptanner.com
                                   714 Montauk Ave., Brooklyn,  NY 11208    718 434-4500   Fax: 718 434-3215
                                    60-01 55th Drive, Maspeth, NY 11378    718 786-2050   Fax: 718 228-7297
                                                     800 3rd Ave., Brooklyn, NY 11232    929 337-1821
   113   114   115   116   117   118   119   120   121   122   123