Page 122 - Tanner Fasteners & Industrial Supplies Biig Book
P. 122

Anchors_2_17.qxp_Layout 1  8/21/17  2:58 PM  Page 114

                                                                      ROD HANGER SYSTEMS

             HANGERMATE + FOR CONCRETE                               • International Code Council, Evaluation Service (ICC-ES). ESR-3889 code
                                                                      APPROVALS & LISTINGS
        ANCHORS  The HangerMate + concrete screw is a one            • FM Approvals (FM) - (see listing for applicable sizes and types).
            Rod Hanging Anchors for Concrete
                                                                     compliant with the 2015  IBC/IRC, 2012 IBC/IRC, and 2009 IBC/IRC.
                                                                     • Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural
            piece, steel anchor designed for rod hanging
                                                                     concrete under the design provisions of ACI 318-14, Chapter 17 & ACI-318-11/08 Appendix D.
            applications such as fire protection systems,
            ventilation systems, electrical conduit, pipe            • Evaluated and qualified by an accredited independent testing laboratory for recognition in
                                                                      cracked and uncracked concrete including seismic and
            hanging and cable trays. Tested and qualified             wind loading (Category 1 anchors)
                                                                     • Evaluated and qualified by an accredited independent testing lab
            for use in cracked concrete and seismic                  for reliability against brittle failure, e.g. hydrogen embrittlement.
            conditions. The concrete HangerMate +
            requires a 1/4" ANSI masonry bit for                                     DEWALT                                ITW Buildex ®
                                                                                     Hangermate+                      Sammys
            installation, accepts 1/4" and 3/8" diameter              Approved Embedments           1-5/8" & 2-1/2"              2-1/4"
            threaded rods and is also available in a 3/8"             Bit Size                                           1/4" ANSI                          Specialty
                                                                      Pullout, Np,cr*                             1412 lbs                            857 lbs
            male thread version.
                                                                     *for 2-1/2” embedment
            • Installs with standard 1/4-inch ANSI drill bit
            • Faster installation resulting in labor savings          HANGERMATE +
            • Patented thread design offers low installation torque   Internal Thread
            • Tough threads for tapping high strength concrete
                                                                      ITEM        SCREW            ROD                SOCKET               BOX                CTN.
                                                                      CODE        SIZE      HANG                  SIZE                SIZE                      QTY.                QTY.
             MATERIAL SPECIFICATIONS                                 DEW PFM2211100             1/4" x 1-5/8"            Vertical        1/4"          3/8"  25  125
                                                                     DEW PFM2211200  1/4" x 1-5/8"  Vertical  3/8"  1/2"  25  125
            Anchor Component             Specification               DEW PFM2211250  1/4" x 2-1/2"  Vertical  3/8"  1/2"  25  125
            Anchor Body       Case hardened low carbon steel
            Plating           Zinc plating according to ASTM B 633, SC1 Type III (Fe/Zn 5).   HANGERMATE +
                              Minimum plating requirements for Mild Service Condition.
                                                                      External Thread
             INSTALLATION                                             ITEM        SCREW            ROD                SOCKET               BOX                CTN.
                                                                      CODE        SIZE      HANG                  SIZE                SIZE                      QTY.                QTY.
                                                                     DEW PFM1421000  1/4" x 1-5/8"  Vertical  3/8"  1/2"  25  125
                                                                     DEW PFM1421050  1/4" x 2-1/2"  Vertical  3/8"  1/2"  25  125

                                                                      HANGERMATE +
                                                                      Installation Accessories and Tools
                                                                               ITEM  CODE   DESCRIPTION   HANGERMATE+                              QTY.      MSTR QTY.
                                                                               DEW PFM1491050  1/4" Socket Driver    Concrete Rod Hanger        1       5
                                                                               DEW PFM1491100             3/8" Socket Driver    Concrete Rod Hanger        1       5
            Using the proper Remove dust   Select a powered Drive the anchor
            drill bit size, drill a and debris from  impact wrench or with an impact
            hole into the base hole during  torque wrench  wrench or torque    DEW DWMT73934B   1/2" Impact Rated External   1       -
            materialto the   drilling (e.g. dust and do notexceed wrench through            Deep Socket
            required depth.  extractor, hollow the maximum  the fixture and    DEW DW2547IR  1/4" Hex to 1/2" Square Adapter
            The tolerances of bit) or following torque, Tipact,  into the hole until  DEW DW5517   1/4" X 6" (4" usable length)
            the drill bit used drilling (e.g.   max or Tinst,max, the head of the           SDS+ Full Head Carbide Masonry Drill Bit
                                                                               DEW 02796SD   Hex Shank SDS-Plus (only for Pivot for Concrete
            should meet the suction, forced  repectively, for  anchor comes into
            requirements of  air) to extract  the selected   contact with the
                                                                               DEW PFM2201050   Adapter for hanging 1/2" rod (3/8" to 1/2" Adapter
            ANSI Standard  loose particles  anchor diameter member surface.
            B212.15.      created during  and embedment . Do not spin the      DEW DCH273P2DH   20V MAX* Brushless Rotary Hammer)
                          drilling..    Attach an    hex socket off the        DEW DCF887D2   20V MAX* XR Brushless 3-Speed Impact Driver
                                        appropriate sized anchor to
                                        hex socket to the disengage. Insert
                                        wrench. Mount
                                                     threaded rod or
                                        the screw anchor threaded bolt
                                                                                            20V MAX* Lithium Ion 3/8" Impact Wrench
                                                                               DEW DCF883M2
                                                     element into
                                        head into the
                                                                                            Cordless Threaded Rod Cutter
                                                                               DEW DCS350D1
           800 456-2658         email:
                                   714 Montauk Ave., Brooklyn,  NY 11208    718 434-4500   Fax: 718 434-3215
                                    60-01 55th Drive, Maspeth, NY 11378    718 786-2050   Fax: 718 228-7297
                                                     800 3rd Ave., Brooklyn, NY 11232    929 337-1821
   117   118   119   120   121   122   123   124   125   126   127