Page 128 - Tanner Fasteners & Industrial Supplies Biig Book
P. 128

Anchors_2_17.qxp_Layout 1  8/21/17  2:59 PM  Page 120

                                                                               CONCRETE INSERTS





              BANG-IT +    Cast-In-Place Concrete Insert Anchors      BANG-IT DECK INSERT (UNC)
                       ®
        ANCHORS  hangar attachments for mechanical, electrical, plumbing   POW 07540   1/4" Bang-It   CODE  HOLE  100
            Bang-It concrete inserts are specifically designed to provide
                                                                                         COLOR
                                                                                               PRE-DRILLED                            BOX
                                                                      ITEM
                                                                                                          QTY.
                                                                      CODE
                                                                               DESCRIPTION
                                                                                               13/16" or 7/8”
                                                                                         Brown
            (MEP) and fire protection. Bang-It concrete inserts are
                                                                                                          100
                                                                                         Green
                                                                                               13/16" or 7/8”
                                                                      POW 07542
                                                                               3/8" Bang-It
            designed for installation in and through composite steel
                                                                      POW 07546
                                                                               5/8" Bang-It
                                                                                               1-3/16" or 1-1/4”
                                                                                                           50
                                                                                         Red
            deck (i.e. “pan-deck”) used to support newly poured concrete   POW 07544   1/2" Bang-It   Yellow   13/16" or 7/8”   100
                                                                      POW 07548   3/4" Bang-It   Purple   1-3/16" or 1-1/4”  50
            floors or roof slabs. After installation, the protective sleeve of   POW 07543   3/8"-1/2” Bang-It  Gray   1-3/16" or 7/8”   100
            the insert protrudes below the surface of the deck. The sleeves
            are color coded by size and allow overhead attachment of steel   INSTALLATION SPECIFICATIONS
            threaded rod in sizes ranging from 1/4" to 3/4" in diameter.
            The sleeve prevents sprayed fireproofing material and acoustical                      Nominal Rod/Anchor Size
                                                                      Dimension        1/4"   3/8"  1/2"  5/8"  3/4"  7/8"
            dampening products from clogging the internal threads of the insert.   Metal Hole Saw Diameter (in.)  13/16  13/16  13/16  1-3/16  1-3/16  1-3/16
            It also prevents burying, masking or losing the insert location. A hex   Drilling Speed (rpm)  700-900  700-900 700-900  500-700 500-700 500-700
            impact plate offers resistance to rotation within the concrete as a steel  Height of Spring (in.)  2  2  2  2  2  2
                                                                      Insert Thread Length (in.)  3/8  5/8  11/16  15/16  1-1/8  1-5/16
            threaded rod is being installed.                          Length of Sleeve (in.)  3-3/8  3-3/8  3-3/8  3-3/8  3-3/8  3-3/8
                                                                      Thread Size, UNC  1/4-20  3/8-16  1/2-13  5/8-1  3/4-10  7/8-9
                                                                      Overall Length (in.)  5-5/16  5-5/16  5-5/16  5-5/16  5-5/16  5-5/16
            FEATURES                                                  Steel Flange Thickness (in.)  5/64  5/64  5/64  5/64  5/64  5/64
           • Fast and simple to install, low installed cost           INSTALLATION
           • Bang-It can be installed in lower flute of steel deck as little as 1.5"
             topping thickness                                        Prior to pouring concrete, use the recommended diameter metal hole saw
                                                                      to drill a hole through the metal deck at the location the insert is needed.
           • Insert design allows for full thread engagement
           • Color coded by size for simple identification            From the topside of the metal deck, place the Bang-It concrete insert's
           • Hex head does not rotate when set                        color-coded, plastic protective sleeve through the pre-drilled hole. The
                                                                      oversized steel flange will balance the spring-loaded impact plate and
           • All sizes suitable for tension and shear loading         cause it to stand upright. Either step on the Bang-It with your foot or
                                                                      using a hand held hammer, strike the head of the Bang-It with enough
                                                                      force to cause the tapered portion of the protective plastic sleeve to push
            GENERAL APPLICATION & USES                                through the metal deck, clamping the deck surface between the sleeve
                                                                      and the flange. When all inserts are installed, concrete pouring may
           • Hanging Pipe and Sprinkler Systems
                                                                      commence.
           • HVAC Ductwork and Strut Channels
                                                                      Either before or after the concrete has been placed, tap the appropriate
           • Suspending Trapeze and Cable Trays
                                                                      diameter steel threaded rod or threaded bolt through the opening at the
           • Mechanical Unit Overhead Utilities                       end of the plastic sleeve and screw into the internally threaded insert.
           • Conduit and Lighting System                              Minimum thread engagement should be one anchor diameter. Concrete
           • Seismic Loading and Cracked Concrete                     should be allowed to properly cure and achieve its design compressive
                                                                      strength before loading the threaded rod with the intended assembly.
                                                                      For safety purposes, it is best to wait until the insert is ready to be put in
             APPROVALS & LISTINGS                                     service before screwing the steel threaded rod into place.
           • International Code Council, Evaluation Service (ICC-ES), ESR-3657 for concrete.
            Approved for seismic and wind loading (all diameters)     INSTALLATION ACCESSORIES
           • Tested in accordance with ASTM E 488 and ICC-ES AC446 for use in concrete
            under the design provisions of ACI 318 (Strength Design method)  ITEM                                   BOX
           • Underwriters Laboratories (UL Listed) - File No. EX1289, see listing for sizes. Also UL   CODE  DESCRIPTION  QTY.
            listed and recognized for use in air handling spaces.     POW 07560  Bang-It StandUp Pole Tool          1
           • Code compliant with the 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, and 2009 IRC  POW 07562  13/16" Carbide Hole Saw for 1/4", 3/8" and 1/2" sizes  1
           • Evaluated and qualified by an accredited independent testing laboratory for recognition   POW 07564  1-3/16" Carbide Hole Saw for 5/8", 3/4" and 7/8" sizes  1
            in cracked and uncracked concrete                         DEW D180014IR  7/8" (22mm) Impact Ready® Hole Saw  1 1 1
            • FM Approvals (Factory Mutual) – File No. J.I. 3015153
        120ANCHORSANCHORS                                                                                          1 1 1
                                                                      DEW D180020IR
                                                                                 1-1/4" (32mm) Impact Ready® Hole Saw
                                                                      POW 07566
                                                                                 Extra Carbide Hole Saw Center Bit
                                                                      DEW DWA1786IR
                                                                                 3/16" - 7/8" Impact Ready® Step Drill Bit
                                                                      DEW DWA1789IR
                                                                                 7/8" - 1-1/8" Impact Ready® Step Drill Bit
                                                                                 20V Max* Lithium Ion Premium 3-Speed Drill/Driver Kit (4.0 Ah) 1
                                                                      DEW DCD980M2
                                                                                 1/2" VSR Pistol Grip Drill With E-Clutch Anti-Lock Control
                                                                      DEW DWD220
           800 456-2658         email: sales@tannerbolt.com        www.shoptanner.com
                                   714 Montauk Ave., Brooklyn,  NY 11208    718 434-4500   Fax: 718 434-3215
                                    60-01 55th Drive, Maspeth, NY 11378    718 786-2050   Fax: 718 228-7297
                                                     800 3rd Ave., Brooklyn, NY 11232    929 337-1821
   123   124   125   126   127   128   129   130   131   132   133