Page 158 - Tanner Fasteners & Industrial Supplies Biig Book
P. 158

Security Catalog 2_17.qxp_Layout 1  8/18/17  12:32 PM  Page 150

                                                                          SECURITY PRODUCTS





           SPIKE ®                                                   Installation
        SECURITY  The Spike anchor is a patented, one-piece, tamper-proof vibration- ®  least 1/2" deeper than the embedment required.
                                                                     Drill a hole into the base material to a depth of at
            Pre-Expanded Anchors
                                                                     The tolerances of the drill bit used should meet the
                   ®
                                                                      requirements of ANSI Standard B212.15. Blow the
            resistant anchor for use in concrete, block, brick or stone.  The Spike
            anchor is formed with an "S" shaped configuration at the working end   hole clean of dust and other material.
                                                                     Where a fixture is used, drive the anchor
            of the anchor to create an expansion mechanism.  Since the anchor is
                                                                     through the fixture into the anchor hole until
            pre-expanded, there is no secondary tightening operation required   the head is firmly seated against the
            which greatly reduces the overall cost of an anchor installation.   fixture. Be sure the anchor is driven to the
            Once seated at the required embedment, residual spring forces developed  required embedment depth.
            in the expansion mechanism provides three compression forces at the
            bottom of the anchor hole. When subjected to vibratory loads, the Spike ®
            will expand due to the residual spring action of the expansion mecha-
            nism.





             Mushroom Head                                           Flat Head
             Grade 8.2 Carbon Steel, Zinc Plated                     Grade 8.2 Carbon Steel, Zinc Plated
             ITEM                                                   SIZE                                                                      MIMIMUM                    BOX  ITEM                                                   SIZE                                                                      MIMIMUM                    BOX
             CODE                        EMBEDMENT               QTY.  CODE                       EMBEDMENT               QTY.
             POW 05502    3/16” x 1”        7/8"  100                 POW 06602   3/16” x 1”      7/8"      100
             POW 05503    3/16” x 1-1/4”    7/8"  100                 POW 06603   3/16” x 1-1/4”         7/8"  100
             POW 05504    3/16” x 1-1/2”    1-1/4"  100               POW 06604   3/16” x 1-1/2”     1-1/4"  100
             POW 05506    3/16” x 2”        1-1/4"  100               POW 06606   3/16” x 2”         1-1/4"  100
             POW 05508    3/16” x 2-1/2”    1-1/4"  100               POW 06622   1/4” x 1”          7/8"   100
             POW 05510    3/16” x 3”        1-1/4"  100               POW 06623   1/4” x 1-1/4”      1"     100
             POW 05511    3/16” x 3-1/2”    1-1/4"  100               POW 06624   1/4” x 1-1/2”      1-1/4"  100
             POW 05512    3/16” x 4”        1-1/4"  100               POW 06626   1/4” x 2”          1-1/4"  100
             POW 05522    1/4” x 1”         7/8"  100                 POW 06628   1/4” x 2-1/2”      1-1/4"  100
             POW 05523    1/4” x 1-1/4”     1"    100                 POW 06630   1/4” x 3”          1-1/4"  100
             POW 05524    1/4” x 1-1/2”     1-1/4"  100               POW 06646   3/8” x 2”          1-3/4"  25
             POW 05526    1/4” x 2”         1-1/4"  100               POW 06648   3/8” x 2-1/2”      1-3/4"  25
             POW 05528    1/4” x 2-1/2”     1-1/4"  100               POW 06650   3/8” x 3”          1-3/4"  25
             POW 05530    1/4” x 3”         1-1/4"  100
             POW 05531    1/4” x 3-1/2”     1-1/4"  100
             POW 05532    1/4” x 4”         1-1/4"  100
             POW 05546    3/8” x 2”         1-3/4"  25
             POW 05548    3/8” x 2-1/2”     1-3/4"  25
             POW 05550    3/8” x 3”         1-3/4"  25
             POW 05551    3/8” x 3-1/2”     1-3/4"  25
             POW 05552    3/8” x 4”        1-3/4"  25                Mushroom Head
             POW 05554    3/8” x 5”         1-3/4"  25               Type 316 Stainless Steel
             POW 05556    3/8” x 6”         1-3/4"  25
             POW 05569    1/2” x 2-3/4”     2-1/2"  50                ITEM                                                   SIZE                                                                      MIMIMUM                    BOX
                                                                      CODE                        EMBEDMENT               QTY.
             POW 05571    1/2” x 3-1/2”     2-1/2"  50                POW 06602   3/16” x 1”      7/8"      100
             POW 05572    1/2” x 4”         2-1/2"  25                POW 06603   3/16” x 1-1/4”         7/8"  100
             POW 05574    1/2” x 5”         2-1/2"  25
                                                                      POW 06604   3/16” x 1-1/2”     1-1/4"  100
             POW 05577    1/2” x 6-1/2”     2-1/2"  25
                                                                      POW 06606   3/16” x 2”         1-1/4"  100
             • Drill Bit Size is same as Anchor Diameter.See pages 8-9 for Carbide Drill Bits.  POW 06622  1/4” x 1”          7/8"  100
             • The published length is measured from below the head to the end of the anchor.  POW 06623  1/4” x 1-1/4”      1"  100
                                                                      POW 06624   1/4” x 1-1/2”      1-1/4"  100
                                                                      POW 06626   1/4” x 2”          1-1/4"  100
                                                                      POW 06628   1/4” x 2-1/2”      1-1/4"  100
                                                                      POW 06630   1/4” x 3”          1-1/4"  100
                                                                      POW 06646   3/8” x 2”          1-3/4"  25
                                                                      POW 06648   3/8” x 2-1/2”      1-3/4"  25
                                                                      POW 06650   3/8” x 3”          1-3/4"  25

       150
           800 456-2658         email: sales@tannerbolt.com        www.shoptanner.com
                                   714 Montauk Ave., Brooklyn,  NY 11208    718 434-4500   Fax: 718 434-3215
                                    60-01 55th Drive, Maspeth, NY 11378    718 786-2050   Fax: 718 228-7297
                                                     800 3rd Ave., Brooklyn, NY 11232  929 337-1821
   153   154   155   156   157   158   159   160   161   162   163