Page 161 - Tanner Fasteners & Industrial Supplies Biig Book
P. 161

Security Catalog 2_17.qxp_Layout 1  8/18/17  12:32 PM  Page 153


             PECORA DYNAFLEX SC                                       PECORA DYNAPOXY EP-1200
              Polyurethane STPU Tamper-Resistant Security Sealant      Two-Part Epoxy Tamper-Proof Security Sealant
              Product Description:                                     Product Description:
              DynaFlex SC is a tamper resistant security sealant. The product   DynaPoxy EP-1200 is a “pick-proof” rigid, two-part,
              is designed to achieve high tensile and tear strengths, abrasion   epoxy resin compound especially designed to make
              resistance and an average ultimate hardness of at least 55, yet   it an excellent joint sealant for high security areas of
              withstand 25% total joint movement. This is a unique one-part,   prisons and other security areas. Due to its high
              non-sag, tamper-resistant elastometric STPU joint sealant with   compressive strength and non-sag properties,
              many of the strengths of two-component security sealants but   DynaPoxy EP-1200 is also used as a structural adhesive for vertical and
              with the user-friendly ease-of application properties of a one-component  overhead bonding and grouting and for bolt embedment. Packaged in a 1-1/2
              sealant. DynaFlex SC is more flexible than epoxy in composition and is   gallon unit including Base and Activator. Color Pack is packaged separately.
              available in 10.1 oz. cartridges in two colors: limestone and tru-white.
                                                                       Basic Uses:
              Basic Uses:                                              • Outstanding adhesion to similar or dissimilar materials, particularly in
              •  This rugged but flexible sealant is ideally suited for use in institutional and   concrete and metal
               correctional complex security installations.            • In high security areas where a harder material is required and flexibility
              • Performs equally well in other public buildings and facilities where ordinary  is less important.
               sealants are easily damaged or torn out by tampering and acts of vandalism.
              1. Change in plane expansion and contraction joints:     • Color-Pack system has pre-measured tint paste
                 A. Floor to wall   B. Head of wall   C. Inside corners  for 49 standard colors (see color chart on p144)
              2. Fixture perimeters: lights, mirrors, sinks, etc.      • Custom colors available upon request. Minimum order 5 Color-Packs per color
              3. Door perimeters:   Frame to wall, gypsum, concrete block  • Standard color after mixing is Concrete Grey.  If the sealant
              4. Window perimeters: Frame to wall, gypsum, concrete     is to be painted, it is not necessary to add a Color-Pack.
              5. Glazing:  Glass or Plaxiglass to frame , Laminated Lexan
              6. Exterior expansion joints in building facades: Masonry,
                                                                       DynaPoxy 1200 should not be used in active joints or in areas where it
                Pre-cast, Block, Concrete
                                                                       might come into contact with food products. It should not be subjected to
              7. Interior seams: Steel, Stainless Steel, Masonry, Window Frames, and Fixtures
                                                                       harsh chemicals  such as acids or solvents and should not be applied in
              Priming:                                                 concrete joints less than 30-days old.
              Security caulking requires exceptional adhesion, particularly in containment
              areas like inmate cells, etc. Since the sealant’s higher hardness puts extra
                                                                       Typical Physical Properties (77°F, 50% RH)
              stress on the bond line, P-75 primer should always be used on porous
                                                                        TEST  PROPERTY       VALUE                    TEST PROCEDURE
              substrates to obtain the proper adhesion. Steel, aluminum, polycarbonate  Compression Strength (psi)  11,000  ASTM D695
              and glass should be primed with P-120.                   Hardness, Shore D, (hours) (max. 72 hours)*  70  ASTM C661
                                                                       Pot Life (minutes)      75     Pecora Corp.
              Limitation:                                              Viscosity             Heavy Paste       • *Hardness may fluctuate
              Should not be used where it may come into contact with food products, or       consistency  Pecora Corp.   from this value due to
                                                                       VOC Content:                             variations in humidity
              harsh chemicals such as acids, strong alkalis, ketones, etc.     Base (g/L)      0      ASTM D3960          and temperature at time
              Typical Physical Properties (77°F, 50% RH)                       Activator (g/L)  0     ASTM D3960  of application
               TEST  PROPERTY         VALUE                    TEST PROCEDURE  ITEM  CODE                    DESCRIPTION  BOX QTY.
               1/4" Cure Through (hours)  48   Pecora Corporation
               Adhesion to Concrete (pli)  35  ASTM C794               PEC EP-1200  1-1/2 gallon unit (346.5 cu. in.) (5.7 liters)  1
               Elongation, ultimate (%)  225   ASTM D412
               Hardness, Shore A Utimate*  55+/-5  ASTM C661  • *Hardness may fluctuate
               Tack Free Time (minutes)  90    ASTM C679   from this value due to                        1. Window Perimeter -
               Tear Strength (ppi)    40+/-5   ASTM D624   variations in humidity                         Pecora DynaFlex SC
               Tensile Strength, ultimate (psi)  250  ASTM D412   and temperature at time
               VOC Content (g/L)      15       ASTM D3960  of application                                2. Non-Moving Fixtures -
                                                                                                          Pecora DynaPoxy EP-1200
               ITEM CODE                     DESCRIPTION  BOX  QTY.  CTN. QTY.
               PEC SC-10.1W 10.1 oz-300ml cartridges white  1  30
               PEC SC-10.1L  10.1 oz-300ml cartridges limestone  1  30
               PEC P-75  1 quart primer for use on porous substrates  1  6
               PEC P-120  1 quart primer for use on non-porous surfaces 1  6
                                                email:        800 456-2658
                                                 714 Montauk Ave., Brooklyn,  NY 11208    718 434-4500   Fax: 718 434-3215
                                                 60-01 55th Drive, Maspeth, NY 11378    718 786-2050   Fax: 718 228-7297
                                                 800 3rd Ave., Brooklyn, NY 11232  929 337-1821
   156   157   158   159   160   161   162   163   164   165   166