Page 426 - Tanner Fasteners & Industrial Supplies Biig Book
P. 426

LiftingRigging_2_17.qxp_Layout 1  8/21/17  9:44 AM  Page 418

                                                                                   WIRE ROPE CLIPS



        RIGGING  CM WIRE ROPE CLIPS


            Sizes: 1/8” to 1-1/2”

        LIFTING &  Used to secure the end of wire rope   • Precision manufactured and galvanized   2. When two clips are required, apply the second
                                                                                        clip as near the thimble or loop as possible.
           when forming a loop; i.e., for wire rope
                                                        to meet federal specifications (FF-C-450
                                                                                        Tighten nuts evenly, alternating until reaching
           turn-back. Clips are available in two
                                                            Type 1  Class 1) on 1/4" and larger.
           configurations: mid-grip (double
                                                            • Drop forged base
                                                                                        clips are required, apply the second clip as near
           saddle) and single saddle, each              • Chart Note: 1/8" through 5/8" packed   the recommended torque. When more than two
           configuration is equally strong. Exercise care   1 piece per poly bag.  3/4" & larger shipped   the loop or thimble as possible and turn nuts on
           for proper installation of single saddle clips.  assembled in factory packs and tagged.  second clip firmly, but do not tighten.
            ITEM                     SIZE           MIN.  NO.  TORQUE        ROPE                 WEIGHT  Proper Use Of Wire Rope Clips  3. When three or more clips are required, space
            CODE                    (IN.)           OF CLIPS   (FT./LBS.)     TURNBACK      (LBS.)  additional clips equally between the first two &
            CM M244 1/8  2  4-1/2        3-1/4          0.08  1. Refer to the chart when following these
            CM M245 3/16   2   7-1/2   3-3/4   0.12  instructions. Turn back specified   Live       take up rope slack. Then tighten
            CM M246 1/4   2   15   4-3/4   0.18                                    End                 nuts on each U-bolt
            CM M247 5/16   2   30   5-1/4  0.30   amount of rope from thimble or
            CM M248 3/8   2   45   6-1/2   0.42   loop. Apply first clip one base      evenly,
            CM M249 7/16   2   65   7   0.70                                                           alternating from one nut to
            CM M250 1/2   3   65   11-1/2  0.85   width from dead end of   Dead                           the other until reach-
            CM M296 9/16   3   95   12   1.00     rope. Apply U-bolt over   End
            CM M251 5/8   3   95   12   1.00      dead end of wire rope, ensuring      ing
            CM M252 3/4   4   130   18   1.53                                     Saddle                the recommended
            CM M253 7/8   4   225   20   2.40     live end rests in saddle. Tighten
            CM M254 1   5   225   26   2.50       nuts evenly, alternate from   U-Bolt  torque.
            CM M255 1-1/8   6   225   34   3.10   one nut to the other                                 4. Apply an initial load
            CM M256 1-1/4   7   360   37   4.10                                1                             2                          3  to loads ex-
                                                                                       equal
            CM M257 1-3/8   7   360   44   4.50   until reaching the                                Live Side
            CM M258 1-1/2   8   360   48   5.40   recommended torque.                  pected in use.   Dead End
            All packaged individually

            MID-GRIP WIRE ROPE CLIPS

            Sizes: 3/16” to 3/4”
            Benefits & Features                  New & Improved Hex Bolt
                                                                                       • Precise Threading Precise threading on bolt and
            • Allows for full arc wrench swing for quicker   & Nut Design                           nut ensures tight alignment and
             installation, retightening and disassembly.
                                                 • Tight, Secure Fit                                        exceptional strength.
            • Saddles are made of forged steel for strength
                                                  Hexagon bolt head fits securely into                • Fewer Loose Parts To Drop
             and wearability. Full assembly is mechanical
                                                  hex-shaped socket for exceptional                        Hex bolt is knurled and
             galvanized per ASTM B695-04 Class 25 Type 1.
                                                  rotation resistance. This prevents spinning        machine pressed into socket to
            •Size, manufacturer and trace code are clearly
                                                  even after repeated use and re-torqueing.         securely couple with the saddle.
             marked on the saddle for easy identification.
            •Meets or exceeds performance requirements
                                                 Proper Use Of Mid-Grip Clips
             of FF-C-450 specifications, Type III, Class 1 and
                                                 1. Refer to chart when following these instructions.  near the loop or thimble as possible and turn
             will provide maximum holding strength.
                                                   Turn back specified amounts of rope from thimble     nuts on second clip firmly, but do not tighten.
            ITEM                        SIZE            MIN.  NO. TORQUE          ROPE               WEIGHT
            CODE                        (IN.)           OF CLIPS  (FT./LBS.)       TURNBACK    (LBS.)    or loop. Apply first clip one base width from dead     3. When three or more clips are required,
            New Style                              end of rope. Tighten nuts evenly,             space additional clips between first
            CM M2546  3/16  2  30               4           0.38  alternating from one nut to other   two and take up rope slack. Then
            CM M2546  1/4   2   30   4   0.38
            CM M2547  5/16  2   30   5   0.38      until reaching recommended torque.             tighten nuts on all clips, alternating
            CM M2548  3/8   2   45   5.5  0.49   2. When two clips are required,                     from one nut to the other until
            CM M2550  7/16  2   65   6.5  0.84     apply second clip as near the loop             reaching the recommended torque.
            CM M2550  1/2   3   65   11   0.84
            CM M2551  9/16  3   130   12.75   1.55  or thimble as possible. Tighten nuts         4. Apply an initial load equal to loads
            CM M2551  5/8   3   130   13.5   1.55  evenly, alternating until reaching              expected in use. Inspect for proper
            Old Style
            CM M2252  3/4  3   225   16   1.79     recommended torque.  When more                  spacing and retighten the nuts to
            All packaged individually              than two clips are required, apply second clip as    the recommended torque.
     418
           800 456-2658         email: sales@tannerbolt.com        www.shoptanner.com
                                   714 Montauk Ave., Brooklyn,  NY 11208    718 434-4500   Fax: 718 434-3215
                                    60-01 55th Drive, Maspeth, NY 11378    718 786-2050   Fax: 718 228-7297
                                                     800 3rd Ave., Brooklyn, NY 11232  929 337-1821
   421   422   423   424   425   426   427   428   429   430   431