Advanced Search
   
   

PE1000+ Adhesive Anchoring

The PE1000+ is a two-component, high strength adhesive anchoring system that meets IBC for strength design of concrete anchors. Ideal for cold and moderate weather applications and works well in damp/wet holes. The PE1000+ is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials and can also be used to anchor into hollow masonry materials using screen tubes.

Code Listings:

  • ICC-ES ESR 2583 - Category 1, Uncracked and Cracked Concrete
  • Code compliant with the 2006 IBC, 2006 IRC, 2003 IBC, 2003 IRC, 2000 IBC, 2000 IRC and 1997 UBC
  • Tested in accordance with AC308 for use in structural concrete according to ACI 318 Appendix D (Strength Design) and as amended by provisions of ICC-ES AC308 Annex A, Section 3.3 (www.icc-es.org)
  • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading

   
Search within these results for:
Item IDDescriptionUOM SizeQuantity
POW 0500SD
Powers PE1000+ Two-Component High Strength Epoxy Adhesive Anchoring System, 13 oz. Dual Cartridge - 12/Bx12
POW 0502SD
Powers PE1000+ Two-Component High Strength Epoxy Adhesive Anchoring System, 20 oz. Dual Cartridge Case - 12/Cs12
 
   

General Applications and Uses:

  • Bonding threaded rod and reinforcing bar into hardened concrete and grouted CMU
  • Evaluated for installation and use in dry and water-saturated concrete including water-filled holes
  • Suitable to resist loads in cracked or uncracked concrete base materials for cases where anchor design theory and criteria applies
  • Qualified for seismic and wind loading (see ESR-2583)
  • Qualified for use in hammer-drill and diamond core drilled holes
  • Can be installed in a wide range of base material temperatures

Features and Benefits:

  • Designed for use with threaded rod and reinforcing bar hardware elements
  • Consistent performance in low and high strength concrete (2,500 to 8,500 psi)
  • Evaluated and recognized for freeze/thaw performance
  • Evaluated and recognized for long term and short term loading
  • Evaluated and recognized for variable embedments
  • Cartridge design allows for multiple uses using extra mixing nozzles
  • Mixing nozzles proportion adhesive and provide simple delivery method into drilled holes
  • Easy dispensing reduces applicator fatigue