Advanced Search
   
   

Anchorage Connectors

The tie-off adapter, boom belt, and scaffold choker is designed to be used as an anchorage connector for a personal fall arrest, restraint, work positioning, suspension, or rescue system. Tie-off adapters and scaffold chokers may be used as an anchorage connector for a horizontal lifeline if the system is designed, installed and used under the supervision of a qualified person. Do not hang, lift, or support tools or equipment from this equipment.

Kevlar web tie-off adapters should be used when working with high temperature tools or materials, or in high temperature environments (foundries, chemical manufacturing, steel fabrication, emergency rescue services, fire services, welders, oil industry, nuclear industry).

Purpose-Built For:

  • PERSONAL FALL ARREST: The anchorage connector is used as a component of a personal fall arrest system. Personal fall arrest systems typically include a full body harness and a connecting subsystem, (energy absorbing lanyard). Maximum permissible free fall is six feet.
  • RESTRAINT: The anchorage connector is used as a component of a restraint system to prevent the user from reaching a fall hazard. Restraint systems typically include a full body harness and a lanyard or restraint line. No vertical free fall permitted.
  • WORK POSITIONING: The anchorage connector is used as a component of a work positioning system to support the user at a work position. Work positioning systems typically include a full body harness, positioning lanyard, and a back-up personal fall arrest system. Maximum permissible free fall is two feet.
  • PERSONNEL RIDING: The anchorage connector is used as a component of a personnel riding system to suspend or transport the user vertically. Personnel riding systems typically include a full body harness, boatswain's chair or seat board, and a back-up personal fall arrest system. No vertical free fall permitted.
  • RESCUE: The anchorage connector is used as a component of a rescue system. Rescue systems are configured depending on the type of rescue. No vertical free fall permitted.
   
Search within these results for:
  »Page Size:   Results Page:  1  2 
Item IDDescriptionUOM SizeQuantity
CAP AJ47406
3M, Protecta 6' Cable Tie-Off Adaptor, 1/4" Vinyl Coated Cable, Choker with Pass-Thru O-Rings at Each End1
CAP 2103678
3M, Protecta Pro Permanent Ridge Roof Anchor with Integral D-Ring, Shingle Over Leaving D-Ring Exposed1
CAP 2103680
3M, Protecta Pro Knock-Down Disposable Roof Anchor with Stamped D-Ring and Fasteners, For Flat or Sloped Wood Roofs - 12/Pack1
CAP 2190001
3M, Protecta Pro Standing Seam Roof Anchor with Swiveling SRL Bracket, Fits 12" to 24" Seam Spacing1
CAP 1003000
3M, DBI Sala 3' Web Tie-Off Adaptor, Pass-Thru Type1
CAP 1003006
3M, DBI Sala 6' Web Tie-Off Adaptor, Pass-Thru Type1
CAP 1201390
3M, DBI Sala 1.4' Web Scaffold Choker with D-Ring and Web Loop1
CAP 2101630
3M, DBI Sala D-Ring Anchorage Plate, Zinc Plated Steel D-Ring, 304 Stainless Steel Plate1
CAP 2101634
3M, DBI Sala D-Ring Anchorage Plate, Zinc Plated Steel D-Ring, Raw Steel Plate1
CAP 2101636
3M, DBI Sala D-Ring Anchorage Plate, 304 Stainless Steel D-Ring and Plate1
CAP 2103143
3M, DBI Sala Trolley for I-Beam, Fits 3" - 8" Wide I-Beams Up to 11/16" Thick1
CAP 1002008
3M, DBI Sala 8' Web Tie-Off Adaptor, Pass-Thru Type1
CAP 1002010
3M, DBI Sala 10' Web Tie-Off Adaptor, Pass-Thru Type1
CAP 1002012
3M, DBI Sala 12' Web Tie-Off Adaptor, Pass-Thru Type1
CAP 1002014
DBI Sala 14' Web Tie-Off Adaptor, Pass-Thru Type, Capital Safety 10020141
 
  »Page Size:   Results Page:  1  2