PowerFoam™ Expansion Foam

PowerFoam is a single component, moisture-curing expanding polyurethane foam. The adhesive strength of PowerFoam allows it to be set on various types of building elements including concrete, brick, wood, metal, aluminum, and steel. When installing the foam, consideration should be given to the 2-3 times expansion of the foam after it leaves the plastic tube. The surface of the foam initially dries within 1- 5 hours and becomes fully cured in 12-15 hours. The foam works best at room temperature. It is dispensed through a straw-like plastic tube that is packaged with the can. The structure of the hardened foam provides excellent insulation against heat and noise. The foam has an R-5 equivalent value when used in place of traditional installation methods.

Polyurethane Expansion Foam

Features and Benefits:

CFC free propellant
Class B2 Flame retardant
Physiologically harmless when fully cured
Contains no urea formaldehyde or PCB's
Does not rot or deteriorate with age
Water-Resistant
Low odor
High foam yield – up to 1.8 ft3 per 29 oz. can
Precision plastic valve helps prevent pressure loss and prolongs the shelf life
Stop and Go application: product remains liquid in applicator until dispensed
Minimal subsequent expansion (± 10%)
Compatible with PVC
VOC: 213.3 g/L

General Applications and Uses:

PowerFoam is used in applications where it is not necessary to control the size of the bead or the rate of flow. PowerFoam can be used in a wide variety of applications. Use it to fill, seal or insulate. It blocks drafts, stops leaks, saves energy, adheres to all types of construction material, deadens sound, acts as a buoyancy material once cured, controls radon, confines asbestos fibers, and can be used in HVAC applications. PowerFoam also seals and keeps out insects and rodents. After installation, it is recommended that a full 24 hours elapse prior to scraping, sanding staining, or painting.

Around window frames, sills, door frames floor/wall joints
Refrigeration units and pipes
Electrical junction boxes
Attics
Air conditioning systems
Breaches in walls
Sound Dampening
Voids in concrete forms
Pipe penetrations in non-fire-rated walls
Underground ductwork
Gaps in construction materials

Approvals & Listings:

Underwriters Laboratory (UL Listing) – File No. R16754, Caulkings and Sealants Tested in accordance with UL 723 "Test for Surface Burning Characteristics of Building Materials"
Applied to Inorganic Reinforced Cement Board tested as applied in two 1" diameter beads, 5" OC covering 12.5 percent of the exposed test area: Flame spread 10, Smoke developed 30
Tested in accordance with ASTM E 90 (Sound Transmission Classification 60), ASTM C 518 and ASTM C 423

Suitable Base Materials

Concrete
Masonry
Wood
Metal
Aluminum
Steel

SKU	Product Type	Size	Pieces Per Unit	Price
POW 08132N	2489	29 oz.	12/Box	$175.20
POW 08130N	2489	12 oz.	12/CS	$87.60

Displaying 2 of 2 Products