Holemaker Technology
1/2"-13 VersaDrive® Impacta Drill & Tap Combo, Spiral Flute, 11mm VersaDrive Hex Shank, High-Grade Tool Steel / Titanium Coating
HMT 301126-0080
IN STOCK
(1/EA)
1/2"-13 VersaDrive® Impacta Drill & Tap Combo
Product Benefits
-
Impact Chipbreaker action for effective swarf evacuation
-
Drill pilot holes and then tap in one fast easy operation
-
Ground flute twist drill creates the correct pilot hole size
-
Rated for material thickness no greater than the diameter of the drill-tap
-
Industrial grade Titanium Nitride coating reduces heat buildup and burn-out
-
Use on Impact to prevent dangerous kickback caused by handheld rotary tools
-
Heavy-duty hex shank design for secure non-slip operation
-
Impact-rated due to dual hardening process - allows up to 15X faster speed than traditional methods
Quick Guide
- For fastest performance use on impact wrenches & impact drivers (Check minimum torque requirement)
- Tapping Stainless Steel requires higher Impact torque
- For maximum tapping depth at each DrillTap size - see Data Sheet
- Use appropriate lubrication & correct RPM to achieve long tool life
Q: Can I use my impact wrench with VersaDrive Drill Taps
Yes, VersaDrive Drill Taps are specially hardened to allow them to be used with Impact Drivers and Wrenches, providing the operating instructions are followed. Versadrive Impact Tapping is up to 15 times faster than hand tapping, creating excellent threaded holes in seconds
Q: How many holes can I expect Sheet Metal Drill Taps to last
We have many customer reports and testimonials of Drill- taps lasting hundreds of holes or even more than a thousand. However, our tools are often used in a tough environment, sometimes with less-than-ideal working conditions so it can vary widely depending on the application and the user life expectancy. If you are getting less than 100-200 holes per tap as a rule of thumb, we can look at your application and suggest some improvements to help increase life expectancy.
Q: Can I Drill & tap Stainless steel using Sheet Metal Impact Drill Taps
Yes, Stainless Steel can be drill/tapped with no issues. For optimum tool life We recommend using lower RPM speeds, higher pressure and increased lubrication.
Q: Which Lubricant do you recommend for Impact Tapping
Speedlube is generally the best all-purpose lubricant, for fast, convenient and accurate aerosol application ensuring coverage inside the hole as well as on the tool. However, our BioCut paste is a very popular and efficient lubricant for dipping the tool directly into the tin. It’s also great for minimising run off or mess, on painted surfaces or other sensitive applications were run off is to be avoided. Aeropaste can be used if working in applications such as Overhead where a fluid lubricant will run off. Finally, BioCut Blue cutting fluid works particularly well with harder materials or difficult applications and is ideal forfor direct application onto the tool and into the hole when working on flat surfaces
Q: What Material Thickness can I Tap
As a rule of thumb, the maximum tapping thickness is the diameter of the thread, so an M10 Drill Tap has a maximum thickness recommendation of 10mm. For thicker materials we reccomend the VersaDrive Heavy Duty Drill Taps
Q: Can I use these for tapping Blind Holes
No Drill Taps cannot be used for Tapping Blind Holes as the drill point has to completely penetrate and exit the surface material before the threaded Tap can start cutting
Specifications
General
- UOM
- EA
- Unit Size
- 1
- Pieces Per Unit
- 1/EA
- Weight
- 0.140000
- Product Type
- Drill & Tap Combo
- Product Brand
- Holemaker Technology
- Product Name
- 1/2"-13 VersaDrive® Impacta Drill & Tap Combo, Spiral Flute, 11mm VersaDrive Hex Shank, High-Grade Tool Steel / Titanium Coating
- MPN
- 301126-0080
- GTIN
- 5060451524833
- EAN
- 5060451524833
Technical
- Diameter
- 1/2"
- Material
- High-Grade Tool Steel
- Finish
- Titanium Coating
- Flute Style
- Spiral
- Shank Size
- 11mm
- Shank Type
- Hex
- Cordless
- No
