Power-Stud+ SD1 Wedge Expansion Anchor

Specifications

Product Description
General Applications and Uses
Features and Benefits
Approvals and Listings
Guide Specifications
Materials Specifications
Head Marking
Length Identification

Product Description

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

General Applications and Uses

• Structural connections, i.e., beam and column anchorage
• Safety-related attachments
• Protective barriers and racking
• Interior applications / low level corrosion environment
• Tension zone applications, i.e., cable trays and strut, pipe supports, fire sprinklers
• Seismic and wind loading

Features and Benefits

• Consistent performance in high and low strength concrete
• Nominal drill bit size is the same as the anchor diameter
• Anchor can be installed through standard fixture holes
• Length ID code and identifying marking stamped on head of each anchor
• Anchor design allows for follow-up expansion after setting under tensile loading

Approvals and Listings

International Code Council, Evaluation Service (ICC-ES), ESR-2818 for cracked and uncracked concrete

International Code Council, Evaluation Service (ICC-ES), ESR-2966 for masonry

Code compliant with the 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, and 2009 IRC

Tested in accordance with ACI 355.2/ASTM E 488 and ICC-ES AC193 for use in structural concrete under the design provisions of ACI 318-14 Chapter 17 or ACI 318-11/08 Appendix D

Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors)

Tested in accordance with ICC-ES AC01 for use in masonry

Underwriters Laboratories (UL Listed) - File No. EX1289, see listing for sizes

Guide Specifications

CSI Divisions: 03 16 00 - Concrete Anchors, 04 05 19.16 - Masonry Anchors and 05 05 19 - Post Installed Concrete Anchors. Expansion anchors shall be Power-Stud+ SD1 as supplied by DEWALT, Towson, MD. Anchors shall be installed in accordance with published instructions and the Authority Having Jurisdiction.

Material Specifications

Head Marking

	Legend
	Letter Code = Length Identification Mark
	'+' Symbol = Strength Design Compliant Anchor (see ordering information)
	Number Code = Carbon Steel Body and Expansion Clip (not on 1/4” diameter anchors)

Length Identification

BUY NOW